This knot was designed for attaching hooks, rings and swivels to heavy monofilament leaders. In this case we go through the steps required to attach a hook. 1a. Thread on your hook. 1b. Isolate the hook on a small loop and make a larger loop with the tag. 2. Hold the smaller loop and tag of the larger loop in the palm of one hand. 3. Twist all the lines together so they are easier to hold onto. 4. Then wrap the smaller loop with the larger loop in the manner shown. 5. Continue until you have made a half dozen or so wraps. 6. Shown is an open view of the configuration we have produced so far. 7. To finish off, place the hook around a fixed object and close the knot by first pulling on the main line (A), then lock the loop in place by pulling firmly on the tag (B).